Xeros Violin Shoulder Cushion Small Standard Height


The new Xeros Shoulder Cushion is the most innovative and comfortable shoulder rest on the market. Made from finest quality neoprene cellular rubber foam with a soft finish and firm support that will last over time. It attaches safely and directly by means of a special gentle suction strip, and it’s just as easy to detach – but won’t come off while playing! And best of all, no rubber bands are needed to hold it in place (But there are two included two just in case you want to use the older method of attachment).


Place the Xeros Shoulder Cushion in any position – you are not restricted by feet or rubber bands that can only hold in one place. Find the position that works for you!
Available in eight sizes, including standard and tall heights. All sizes will fit all sizes of violin or viola down to 1/8 size. (Extra small is recommended for 1/10 size and smaller violins). Depending on how much support you want, pick the size that works best for you. Many professional players prefer the small or extra small sizes.
Standard Height (approximate Length x Width x Height at tall end)L Large: 5.9″ x 1.5″ x 1.19″ M Medium: 5.25″ x 1.5″ x 1.15″ S Small: 4.7″ x 1″ x 1.1″ XS Extra Small: 4″ x 1″ x .85″
Tall Height (approximate Length x Width x Height at tall end)
LT Large: 5.9″ x 1.5″ x 1.65″ MT Medium: 5.25″ x 1.5″ x 1.45″ ST Small: 4.7″ x 1″ x 1.3″ XST Extra Small: 4″ x 1″ x 1.1″
Made in the USA
Attention: Fresh, soft, or brittle varnish can be removed by contact with any gripping surface. If you use an antique instrument, recently had your instrument refinished, or are concerned that your instrument’s varnish is soft, you should use this accessory with caution. To avoid possible varnish removal, choose a clip-on shoulder rest, or one that attaches with elastic or rubber bands only.

You may also like…